OFFSHORE Solutions
Dyena OFFSHORE is available in different formats for suit various applications. From low cost variants for warranty protection to 9 axis solutions with remote sensors for gathering high resolution data.
Which are you?
Shock mitigating technology is allowing boats to go faster and harder, increasing stress and risk of accident. The fast boat builders are now fitting impact monitoring systems to protect themselves from future warranty claims caused by the vessel being driven beyond the structural limits or the skipper’s skill level.
In the event of an incident the data can be used to distinguish between genuine claims or damage caused by inappropriate driving, or by overlaying the course on a chart, perhaps a collision with a fixed object.
This is not a new clandestine tactic. For many years, car manufacturers have been recording data within the ECU to protect themselves from dishonest customers who may claim the gearbox “just fell apart at the traffic lights” but omitted the fact they had changed from 6th gear to 2nd gear on the motorway.
Recommend System: OFFSHORE Protect
A vessel is a considerable investment. With the Dyena OFFSHORE keep track of daily use and schedule the fleets servicing based upon actual usage. The traffic light system can be used to monitor vessel structural integrity against operational speed and wave height restrictions or maximum allowable vessel vertical accelerations.
Recommend System: OFFSHORE Protect with Helm Indicator Panel
With UK & EU legislation now in force, more pressure is being made on employers to ensure that the necessary steps are taken to monitor the health of their workforce. For a small investment, Dyena OFFSHORE provides a health surveillance system and protection for the employer.
An employer’s duty of care requires them to ensure that all passengers and crew are safe and it is in their interests to monitor the situation not only from a health and safety perspective, but also to expose any driving habits or situations that may be putting other staff at risk. A crew member or passenger with an injury caused by an overzealous or unlucky skipper could result in a financial loss for the company and a subsequent investigation by the relevant Safety Executive and insurers.
Recommend System: OFFSHORE Professional
Easy access to craft dynamics. Internal sensors to record vessel monition in 6 axis. With pitch, Roll and Yaw data recorded alongside the X,Y,Z accelerations, the system provides high resolution data for development and long term trials.
Recommend System: OFFSHORE Premium
Gathering accurate data on vessel performance during trials is important to fully understand the results, but it is not always convenient to rig the sensors.
The OFFSHORE Scout system incorporates everything into a rugged case with internal battery pack for quick setup on any vessel.
Recommend System: OFFSHORE Scout
OFFSHORE Protect
Perfect for vessel manufacturers who require data for warranty protection or condition based maintenance.
- Low cost
- Remote uploads
- Records peak values every second
- Over 2 years memory
- Engine and throttle data stored
Simple to fit and autonomous in operation, OFFSHORE Protect continuously monitors the vessels usage and performance, recording to the high capacity internal memory. A discreet LED helm indicator panel forewarns the skipper if they are approaching safe operational limits.
Data can be automatically uploaded to the remote server or downloaded on the dockside for immediate analysis. Safeguard against false warranty claims by verifying against the stored information.
| Sensors | 3 Axis Accelerometer +/- 16g 1000 Hz Sampling with noise filtering (250 Hz low pass) |
|
| Recorded Data | X, Y, Z acceleration Course over ground Speed over ground Position Time |
|
| Frequency |
|
|
| Works with |
Helm LED Indicator Display
|
Sunseeker International, Whitmarsh Ribs, Zodiac Milpro
OFFSHORE Protect with Helm Indicator Panel
Protect your investment and alert the operator if they are approaching or exceeding vessel limits.
Compact and only requiring a small slot, the self-adhesive panel can be retrofitted to any helm.
- Records vessel performance and impacts
- Remote uploads
- Self adhesive membrane panel
- 6 daylight readable LEDs
- programmable thresholds
- Customisable graphics
- IP67
Simple to fit and autonomous in operation, OFFSHORE Protect continuously monitors the vessels usage and performance, recording to the high capacity internal memory. A discreet LED helm indicator panel forewarns the skipper if they are approaching safe operational limits.
Data can be automatically uploaded to the remote server or downloaded on the dockside for immediate analysis. Safeguard against false warranty claims by verifying against the stored information.
| Sensors | 3 Axis Accelerometer +/- 16g 1000 Hz Sampling with noise filtering (250 Hz low pass) |
|
| Recorded Data | X, Y, Z acceleration Course over ground Speed over ground Position Time |
|
| Frequency |
|
|
| Works with |
Helm LED Indicator Display
|
Sunseeker International, Whitmarsh Ribs, Zodiac Milpro
OFFSHORE Professional
For operators and agencies requiring vessel and crew monitoring, the OFFSHORE Professional system provides high resolution data to support a wide range of offshore activities.
Vessel accelerations are recorded at 25 hz alongside speed, time and position. Auxiliary sensors monitor accelerations throughout the vessel, recording all data to the central unit.
Condition monitoring sensors for shock mitigating seats ensure that the crew are adequately protected in all sea condition and integrated smartphone apps provide improved welfare for remote workers.
Crew tracking operates via wireless ID cards to automatically record the personnel onboard for each transit. Data is uploaded autonomously to the remote server or downloaded to a USB memory device.
| Sensors | 3 Axis Accelerometer +/- 16g 1000 Hz Sampling with noise filtering (250 Hz low pass) |
| Recorded Data | X, Y, Z acceleration Course over ground Speed over ground Position Time |
| Frequency | 25 Hz recording of peak and average values |
| Available extras |
LED Indicator Display
Crew Tracking Remote sensors |
Royal Marines, KNRM, PD Ports, New Zealand Defence Force, Whiskey Project
OFFSHORE Premium
OFFSHORE Premium includes additional sensors to record vessel monition in 6 axis. With pitch, Roll and Yaw data recorded alongside the X,Y,Z accelerations, the system provides high resolution data for development and long term trials.
- 1000 hz sampling
- Internal filters to remove noise
- Records peaks at 25 hx or 100 hz
- Full NMEA data capture
Accelerations and motions are sampled at 1000 hz, filtered with peaks recorded 100 per second alongside speed, time and position. Auxiliary sensors monitor accelerations throughout the vessel, recording all data to the central unit.
Crew tracking operates via wireless ID cards to automatically record the personnel onboard for each transit.
Engine and vessel data can be recorded via a CANBUS to the internal high capacity memory. Data is uploaded autonomously to the remote server or downloaded to a USB memory device.
| Sensors |
|
|
| Recorded Data | X, Y, Z acceleration Pitch, Roll, Yaw Engine RPMs* Throttle position* Steering angle* Speed through water* Engine parameters* Course over ground Speed over ground Position Time |
|
| Frequency | 25 Hz recording of peak and average values | |
| Available extras |
LED Indicator Display
Crew Tracking Remote sensors |
Ministry of Defence, Royal Marines, Zodiac Milpro, MST, James Fisher
OFFSHORE Scout
The Dyena OFFSHORE Scout system provides a complete monitoring package in one case. Capturing data for trials or vessel development is simplified but having a complete system in a rugged waterproof case.
Incorporating a high capacity lithium ion battery and internal GPS, over 24 hours continuous operation can achieved by simply strapping the box to the vessel.
Vessel accelerations are recorded at 25 hz alongside speed, time and position. Auxiliary sensors monitor accelerations throughout the vessel, recording all data to the central unit.
Crew tracking operates via wireless ID cards to automatically record the personnel onboard for each transit. Data is uploaded autonomously to the remote server or downloaded to a USB memory device.
Rugged Waterproof Case
- Simple to transport and install
- Internal GPS
Vessel Monitoring Unit
- Over 2 year memory
- Encrypted data downloads
- Self calibrating
USB Memory Stick With Viewer
- Installed with Windows PC software
- Download and view data directly.
External LED Indicators
- Monitor accelerations
- 6 daylight readable LEDs
- Customisable thresholds
Rechargeable Battery Pack
- Lithium Polymer, light weight
- Provides over 24 hours operation.
- 100v / 240v mains charger
| Sensors | 3 Axis Accelerometer +/- 16g 2000 Hz Sampling with noise filtering (250 Hz low pass) |
| Recorded Data | X, Y, Z acceleration Course over ground Speed over ground Position Time |
| Frequency | 25 Hz recording of peak and average values |
| Available extras |
LED Indicator Display
Crew Tracking Remote sensors |
Royal Marines, Kobus Naval Design, Supermarine
LiveTRAX
LiveTrax is an enterprise solution for national fishery authorities to track their fleet.
Dyena LiveTRAX enables authorities to monitor the position of their fishing fleet in real time, assisting in the management of fish stocks and protection of Exclusive Economic Zones.
Dyena LiveTRAX improves the safety of solo operators with a failsafe wireless crew alert facility that alerts the authority if they fall overboard or become incapacitated. Worn within the base clothing layer, oversight is maintained even if life vest and jacket containing PLB is removed.
Dyena LiveTRAX also records crew and vessel exposure to vibration and impact, with further sensors added if required. Smartphone apps compliment the system and custom reporting features can be tailored to the authority’s requirements.
Contact us to discuss your fishery tracking requirements
| Sensors | 3 Axis Accelerometer +/- 16g 2000 Hz Sampling with noise filtering (250 Hz low pass) |
| Recorded Data | X, Y, Z acceleration Course over ground Speed over ground Position Time |
| Frequency | 25 Hz recording of peak and average values |
| Available extras |
LED Indicator Display
Crew Tracking Remote sensors |
Contact us to discuss your requirements
Compare data options
| Protect | Professional | Premium | Scout | |
|---|---|---|---|---|
| Course over ground |  | | | |
| Speed over ground | | | | |
| Position | | | | |
| Time | | | | |
| X, Y, Z accelerations | | | | |
| Pitch, Roll, Yaw (bearing) | | |
||
| 1 Hz logging | | | | |
| 25 Hz logging | | | |
|
| Engine Canbus | | | | |
| NMEA data |  | | | |
| Crew manifest | | | | |
Standard Option
Vessel Monitoring Unit
The Vessel Monitoring Unit (VMU) records detailed information on a vessel’s motion, position and performance, through various parameters including pitch, roll, yaw and accelerations in 3 axes.
With sampling up to 1000 Hz, all data is recorded alongside GPS data to include SOG, COG, time and position. Engine data from the vessels NMEA canbus
network can be included.
Installation is simple. The internal GPS antenna and self calibrating sensors begin recording to the solid state memory when the unit is powered.
Up to 16 Remote sensors can be mounted on vessel structure or equipment to measure shock and vibration in different locations.
3 Axis accelerometer +/- 16g
1000 Hz sampling with bandpass filtering
1, 25 or 100 Hz recording of peak values*
9 Axis internal monitoring unit (IMU)*
Internal GPS
2 year memory capacity
Autonomous upload to remote server*
Encrypted data
10v to 32v
210 x 120 x 60 mm
0.8 Kg
IP67
*Depending upon system purchased
Remote Sensors
Multiple sensors can positioned in the vessel at required locations to record accelerations in 3 axis. Results are recorded to the VMU and synchronised with data from other modules. Connected via a CANBUS network, 16 remote sensors can be added to each vessel.
3 Axis accelerometer +/- 16g
1000 Hz sampling with bandpass filtering
1, 25 or 100 Hz recording of peak values*
65 x 55 x 35 mm
150 grams
IP67
Helm Display
LED indicators provide feedback to the skipper on their current impact exposure levels or how close they are to the vessels operational limits.
6 LEDs individually controlled by VMU
Daylight readable
Customisable thresholds
Acknowledgement button
Low profile, self adhesive membrane panel
58mm x 42mm
IP67
Crew Tracking ID Cards
Wireless ID cards allow the VMU to record which crew members are onboard the vessel during each transit. This data is uploaded with the vessel data.
Wireless – 50m range
Autonomous operation
1 year battery life
Credit card size
IP67
